1994 yamaha vxr pro jet ski gauge hose? - yamaha vxr pictures
Theres a hose that goes counter to some ideas? I have half a tank of fuel will be null and VXR looked at the photos and the pipe seems to be going somewhere in the hood, but I see the connections for all existing
Friday, February 5, 2010
Yamaha Vxr Pictures 1994 Yamaha Vxr Pro Jet Ski Gauge Hose?
Subscribe to:
Post Comments (Atom)
2 comments:
the hose is a valve to keep the condensation of moisture on the lens.
Fuel gauges are no lines that have cable. Water hoses under pressure, and thus speedometer (sometimes).
When the fuel gauge has a hose from the back, because there are two son inside. Uniform color for the fuel sender is pink, and the soil is black.
During the experiment, one eye on the cowardly son of corrosion in the connections, missing / isolation burning / irritation, something like that.
Turn the key step (engine).
Drag the sender in the tank. Gauge below E.
Touch directors about the sender in the engine block. Gauge should be modified PEG F.
If you get this result, the indicator is very good.
If the needle does not move, test the cable continuity of the issuer. If the tests are negative, replace the cable and repeat the test. Still no camera movement, to test the wire. If you can, the camera was suspended for some time.
If the sender is a continuous positive cable, then drag the son of the sender, and pull the float tank. MACTION resistance between the two terminals of the sender. Should be 240 ohms with the float-down, full of 100 ohms to 1 / 2 and 33 ohms.
Any other outcome, replace the sender.
If the sender and to measure both a good test, then the swimmer should be saturated and not floating or float arm slightly in shape or slightly distorted.
Or nothing happens, and do not want to fix the problem without realizing it - Bulk cable or whatever.
Post a Comment